Commit b297027d authored by ankraft's avatar ankraft

Applied corrections to documentation according to editHelp's comments. Changed...

Applied corrections to documentation according to editHelp's comments. Changed names of misspelled data points smokeThreshold and temperatureThreshold.
parent e9460cee
......@@ -49,7 +49,7 @@ oneM2M EXPRESSLY ADVISES ANY AND ALL USE OF OR RELIANCE UPON THIS INFORMATION PR
</Module>
<Module name="temperature" optional="false">
<extends domain="org.onem2m.home.moduleclass" class="temperature"/>
<Doc>This value of “currentTemperature” in this module instance represents the temperature of the nozzle. This value SHALL be a float number in a range from 0.0 to 1000.0.</Doc>
<Doc>This value of “currentTemperature” in this module instance represents the temperature of the nozzle. This value SHALL be a float number in a range from 0,0 to 1 000,0.</Doc>
</Module>
<Module name="printQueue" optional="false">
<extends domain="org.onem2m.home.moduleclass" class="printQueue"/>
......@@ -86,7 +86,7 @@ oneM2M EXPRESSLY ADVISES ANY AND ALL USE OF OR RELIANCE UPON THIS INFORMATION PR
</Module>
<Module name="sleepTimer" optional="true">
<extends domain="org.onem2m.home.moduleclass" class="timer"/>
<Doc>The sleep function, which is vendor-specific algorithm (for example increasing the remperature by one degree for every 30 minutes), is triggered instantly when "targetDuration" is set, and it indicates the time to the end of appliance operation. It is set at runtime by a user application.</Doc>
<Doc>The sleep function, which is vendor-specific algorithm (for example increasing the temperature by one degree for every 30 minutes), is triggered instantly when "targetDuration" is set, and it indicates the time to the end of appliance operation. It is set at runtime by a user application.</Doc>
</Module>
<Module name="turbo" optional="true">
<extends domain="org.onem2m.home.moduleclass" class="turbo"/>
......@@ -501,7 +501,7 @@ oneM2M EXPRESSLY ADVISES ANY AND ALL USE OF OR RELIANCE UPON THIS INFORMATION PR
<Device id="deviceDoor">
<Doc>A door is a device that is used to open and close a door.</Doc>
<Doc>A deviceDoor is a device that is used to open and close a door.</Doc>
<Modules>
<Module name="openLevel" optional="true">
<extends domain="org.onem2m.home.moduleclass" class="openLevel"/>
......@@ -611,7 +611,7 @@ oneM2M EXPRESSLY ADVISES ANY AND ALL USE OF OR RELIANCE UPON THIS INFORMATION PR
<Device id="deviceHomeCCTV">
<Doc>A home CCTV is a smart home appliance to provide monitoring capabilities when people stay way from their home or a room, or to monitor the environmental status of their home or room.</Doc>
<Doc>A home CCTV is a smart home appliance to provide monitoring capabilities when people stay away from their home or a room, or to monitor the environmental status of their home or room.</Doc>
<Modules>
<Module name="binarySwitch" optional="false">
<extends domain="org.onem2m.home.moduleclass" class="binarySwitch"/>
......@@ -824,11 +824,11 @@ oneM2M EXPRESSLY ADVISES ANY AND ALL USE OF OR RELIANCE UPON THIS INFORMATION PR
<Modules>
<Module name="pulsemeter" optional="true">
<extends domain="org.onem2m.home.moduleclass" class="pulsemeter"/>
<Doc>When the "oximeter" module doesn’t exist, then the "pulsemeter" module is mandatory.</Doc>
<Doc>When the "oximeter" module does not exist, then the "pulsemeter" module is mandatory.</Doc>
</Module>
<Module name="oximeter" optional="true">
<extends domain="org.onem2m.home.moduleclass" class="oximeter"/>
<Doc>When the "pulsemeter" module doesn’t exist, then the "oximeter" module is mandatory.</Doc>
<Doc>When the "pulsemeter" module does not exist, then the "oximeter" module is mandatory.</Doc>
</Module>
<Module name="battery" optional="false">
<extends domain="org.onem2m.home.moduleclass" class="battery"/>
......@@ -857,7 +857,7 @@ oneM2M EXPRESSLY ADVISES ANY AND ALL USE OF OR RELIANCE UPON THIS INFORMATION PR
</Module>
<Module name="customTemperature" optional="true">
<extends domain="org.onem2m.home.moduleclass" class="temperature"/>
<Doc>This module can be configured to fridge temperature or frozen temperature based on its usage by manufacturer</Doc>
<Doc>This module can be configured to fridge temperature or frozen temperature based on its usage by manufacturer.</Doc>
</Module>
<Module name="refrigeration" optional="true">
<extends domain="org.onem2m.home.moduleclass" class="refrigeration"/>
......@@ -914,7 +914,7 @@ oneM2M EXPRESSLY ADVISES ANY AND ALL USE OF OR RELIANCE UPON THIS INFORMATION PR
<Device id="deviceSecurityPanel">
<Doc>A security pannel is a device that can change the security mode of, for example, an alarm system.</Doc>
<Doc>A security panel is a device that can change the security mode of, for example, an alarm system.</Doc>
<Modules>
<Module name="securityMode" optional="false">
<extends domain="org.onem2m.home.moduleclass" class="securityMode"/>
......@@ -946,7 +946,7 @@ oneM2M EXPRESSLY ADVISES ANY AND ALL USE OF OR RELIANCE UPON THIS INFORMATION PR
<Device id="deviceSmartElectricMeter">
<Doc>A smart electric meter is a metering device that is used to measure consumption data for electrictricity.</Doc>
<Doc>A smart electric meter is a metering device that is used to measure consumption data for electricity.</Doc>
<Modules>
<Module name="faultDetection" optional="true">
<extends domain="org.onem2m.home.moduleclass" class="faultDetection"/>
......
......@@ -44,13 +44,13 @@ oneM2M EXPRESSLY ADVISES ANY AND ALL USE OF OR RELIANCE UPON THIS INFORMATION PR
</DataType>
</DataPoint>
<DataPoint name="printSizeX" readable="true" writable="false" eventable="true" optional="false" >
<Doc>This data pointrepresents the maximum size of a printing object in the direction of X-axis. The unit of measure is "mm". (1/10cm).</Doc>
<Doc>This data point represents the maximum size of a printing object in the direction of X-axis. The unit of measure is "mm". (1/10cm).</Doc>
<DataType>
<SimpleType type="float" />
</DataType>
</DataPoint>
<DataPoint name="printSizeY" readable="true" writable="false" eventable="true" optional="false" >
<Doc>This data poin represents the maximum size of printing object in the direction of Y-axis. The unit of measure is "mm". (1/10cm).</Doc>
<Doc>This data point represents the maximum size of printing object in the direction of Y-axis. The unit of measure is "mm". (1/10cm).</Doc>
<DataType>
<SimpleType type="float" />
</DataType>
......@@ -129,7 +129,7 @@ oneM2M EXPRESSLY ADVISES ANY AND ALL USE OF OR RELIANCE UPON THIS INFORMATION PR
<Doc>This ModuleClass provides capabilities for controlling the air flow of a device.</Doc>
<Data>
<DataPoint name="speed" readable="true" writable="false" eventable="true" optional="false" >
<Doc>The current speed level in the range of the [minSpeed, maxSpeed] data poins.</Doc>
<Doc>The current speed level in the range of the [minSpeed, maxSpeed] data points.</Doc>
<DataType>
<SimpleType type="integer" />
</DataType>
......@@ -227,7 +227,7 @@ oneM2M EXPRESSLY ADVISES ANY AND ALL USE OF OR RELIANCE UPON THIS INFORMATION PR
</DataType>
</DataPoint>
<DataPoint name="sensorPM2" readable="true" writable="false" eventable="true" optional="true" >
<Doc>The concentration of particle matter under 2.5um. The minimum value is 0, and the maximum value is 1000.</Doc>
<Doc>The concentration of particle matter under 2,5um. The minimum value is 0, and the maximum value is 1000.</Doc>
<DataType>
<SimpleType type="integer" />
</DataType>
......@@ -239,7 +239,7 @@ oneM2M EXPRESSLY ADVISES ANY AND ALL USE OF OR RELIANCE UPON THIS INFORMATION PR
</DataType>
</DataPoint>
<DataPoint name="sensorOdor" readable="true" writable="false" eventable="true" optional="true" >
<Doc>The concentration of odor that reflects air pollution. The minimum value is 0, and the maximum value is 1000.</Doc>
<Doc>The concentration of odor that reflects air pollution. The minimum value is 0, and the maximum value is 1 000.</Doc>
<DataType>
<SimpleType type="integer" />
</DataType>
......@@ -251,7 +251,7 @@ oneM2M EXPRESSLY ADVISES ANY AND ALL USE OF OR RELIANCE UPON THIS INFORMATION PR
</DataType>
</DataPoint>
<DataPoint name="monitoringEnabled" readable="true" writable="true" eventable="true" optional="true" >
<Doc>The current status of monitoring. "True" indicates enabled, and "False" indicates not enabled..</Doc>
<Doc>The current status of monitoring. "True" indicates enabled, and "False" indicates not enabled.</Doc>
<DataType>
<SimpleType type="boolean" />
</DataType>
......@@ -535,7 +535,7 @@ oneM2M EXPRESSLY ADVISES ANY AND ALL USE OF OR RELIANCE UPON THIS INFORMATION PR
<Doc>This ModuleClass provides the capability to report the measurement of a body composition analyser.</Doc>
<Data>
<DataPoint name="bodyLength" readable="true" writable="false" eventable="true" optional="true" >
<Doc>The measurement of body length by Weight scale and Body composition analyser. The unit of measure is centimeter(cm)..</Doc>
<Doc>The measurement of body length by Weight scale and Body composition analyser. The unit of measure is centimetre(cm)..</Doc>
<DataType>
<SimpleType type="float" />
</DataType>
......@@ -613,7 +613,7 @@ oneM2M EXPRESSLY ADVISES ANY AND ALL USE OF OR RELIANCE UPON THIS INFORMATION PR
<ModuleClass name="brightness">
<Doc>This ModuleClass provides capabilities to control and monitor the brightness of a light for example from a lamp. Brightness is scaled as a percentage. A lamp or a monitor can be adjusted to a level of light between very dim (0% is the minimum brightness) and very bright (100% is the maximum brightness).</Doc>
<Doc>This ModuleClass provides capabilities to control and monitor the brightness of a light for example from a lamp. Brightness is scaled as a percentage. A lamp or a monitor can be adjusted to a level of light between very dim (0 % is the minimum brightness) and very bright (100 % is the maximum brightness).</Doc>
<Data>
<DataPoint name="brightness" readable="true" writable="true" eventable="true" optional="false">
<Doc>The status of brightness level in percentage.</Doc>
......@@ -808,10 +808,10 @@ oneM2M EXPRESSLY ADVISES ANY AND ALL USE OF OR RELIANCE UPON THIS INFORMATION PR
<ModuleClass name="colourSaturation">
<Doc>This ModuleClass provides cababilities to control and monitor a colour saturation value.</Doc>
<Doc>This ModuleClass provides capabilities to control and monitor a colour saturation value.</Doc>
<Data>
<DataPoint name="colourSaturation" readable="true" writable="true" eventable="true" optional="false">
<Doc>The status of colour saturation level. "colourSaturation" has a range of [0,100]. A "colourSaturation" value of 0 means that a device displays or produces black and white images. A "colourSaturation" value of 50 means that a device displays or produces normal colour images. A "colourSaturation" value of 100 means that a device displays or produces very colourfull images.</Doc>
<Doc>The status of colour saturation level. "colourSaturation" has a range of [0,100]. A "colourSaturation" value of 0 means that a device displays or produces black and white images. A "colourSaturation" value of 50 means that a device displays or produces normal colour images. A "colourSaturation" value of 100 means that a device displays or produces very colourful images.</Doc>
<DataType>
<SimpleType type="integer" />
</DataType>
......@@ -1012,7 +1012,7 @@ oneM2M EXPRESSLY ADVISES ANY AND ALL USE OF OR RELIANCE UPON THIS INFORMATION PR
</DataType>
</DataPoint>
<DataPoint name="multiplyingFactors" readable="true" writable="false" eventable="true" optional="true">
<Doc>The unit for data multiplying factors, for example 1 kWh, 0,1 kWh, 0,01 kWh etc.</Doc>
<Doc>The unit for data multiplying factors, for example 1 kWh, 0,1 kWh, 0,01 kWh, etc.</Doc>
<DataType>
<SimpleType type="integer" />
</DataType>
......@@ -1049,7 +1049,7 @@ oneM2M EXPRESSLY ADVISES ANY AND ALL USE OF OR RELIANCE UPON THIS INFORMATION PR
<Doc>This ModuleClass provides information about generation data on electric generator devices such as a photo voltaic power system, fuel cells, or microgeneration</Doc>
<Data>
<DataPoint name="powerGenerationData" readable="true" writable="false" eventable="true" optional="true">
<Doc>Amount of instaneous generation data. The unit of measure is Watt (W).</Doc>
<Doc>Amount of instantaneous generation data. The unit of measure is Watt (W).</Doc>
<DataType>
<SimpleType type="float" />
</DataType>
......@@ -1067,7 +1067,7 @@ oneM2M EXPRESSLY ADVISES ANY AND ALL USE OF OR RELIANCE UPON THIS INFORMATION PR
</DataType>
</DataPoint>
<DataPoint name="multiplyingFactors" readable="true" writable="false" eventable="true" optional="true">
<Doc>The unit for data multiplying factors, for example. 1 kWh, 0,1 kWh, 0,01 kWh etc.</Doc>
<Doc>The unit for data multiplying factors, for example. 1 kWh, 0,1 kWh, 0,01 kWh, etc.</Doc>
<DataType>
<SimpleType type="integer" />
</DataType>
......@@ -1167,7 +1167,7 @@ oneM2M EXPRESSLY ADVISES ANY AND ALL USE OF OR RELIANCE UPON THIS INFORMATION PR
</DataType>
</DataPoint>
<DataPoint name="heading" readable="true" writable="true" eventable="true" optional="true" >
<Doc>The azimuth of a device measured in degrees to true north. North is 0.0 degrees, east is 90.0 degrees, south is 180.0 degrees, west is 270.0 degrees. A negative value indicates an unknown heading.</Doc>
<Doc>The azimuth of a device measured in degrees to true north. North is 0,0°, east is 90,0°, south is 180,0°, west is 270,0°. A negative value indicates an unknown heading.</Doc>
<DataType>
<SimpleType type="float" />
</DataType>
......@@ -1252,7 +1252,7 @@ oneM2M EXPRESSLY ADVISES ANY AND ALL USE OF OR RELIANCE UPON THIS INFORMATION PR
</DataType>
</DataPoint>
<DataPoint name="contextMeal" readable="true" writable="false" eventable="true" optional="true" >
<Doc>The style of meals (for examople "casual").</Doc>
<Doc>The style of meals (for example "casual").</Doc>
<DataType>
<SimpleType type="string" />
</DataType>
......@@ -1366,7 +1366,7 @@ oneM2M EXPRESSLY ADVISES ANY AND ALL USE OF OR RELIANCE UPON THIS INFORMATION PR
</DataType>
</DataPoint>
<DataPoint name="impactDirectionHorizontal" readable="true" writable="false" eventable="true" optional="true" >
<Doc>The "impactDirection" indicates the horizontal direction where the impact comes from. The value is 0° to 360°. 0 is the front of the sensor and with clockwise increment. </Doc>
<Doc>The "impactDirection" indicates the horizontal direction where the impact comes from. The value is 0° to 360°. 0 is the front of the sensor and with clockwise increment.</Doc>
<DataType>
<SimpleType type="float" />
</DataType>
......@@ -1382,7 +1382,7 @@ oneM2M EXPRESSLY ADVISES ANY AND ALL USE OF OR RELIANCE UPON THIS INFORMATION PR
<ModuleClass name="keepWarm">
<Doc>This module allows to control the ‘keep warm’ feature in devices like coffe machines, kettles etc. It allows to keep water warm for a desired time. This ModuleClass inherits from binarySwitch (see clause 5.3.12) to store setting for the ‘keep warm’ feature. If the "powerState" data point in a keepWarmSwitch is "True" then the ‘keep warm’ function will be performed just after boiling (or heating) process is finished (otherwise this function will not be applied).</Doc>
<Doc>This module allows to control the ‘keep warm’ feature in devices like coffee machines, kettles etc. It allows to keep water warm for a desired time. This ModuleClass inherits from binarySwitch (see clause 5.3.12) to store setting for the ‘keep warm’ feature. If the "powerState" data point in a keepWarmSwitch is "True" then the ‘keep warm’ function will be performed just after boiling (or heating) process is finished (otherwise this function will not be applied).</Doc>
<Data>
<DataPoint name="time" readable="true" writable="true" eventable="true" optional="true" >
<Doc>The desired duration of ‘keep water warm’ function. It indicates how long water shall be kept warm, for example after the boiling in a kettle. The value indicates a time expressed in minutes.</Doc>
......@@ -1497,7 +1497,7 @@ oneM2M EXPRESSLY ADVISES ANY AND ALL USE OF OR RELIANCE UPON THIS INFORMATION PR
</DataType>
</DataPoint>
<DataPoint name="silentTime" readable="true" writable="true" eventable="true" optional="true">
<Doc>The time that a motionSensor restrains from sending an alarm in case continous motions are detected after one alarm is produced. This data point can be used to avoid repeated alarm reports. The unit of measure is seconds.</Doc>
<Doc>The time that a motionSensor restrains from sending an alarm in case continuous motions are detected after one alarm is produced. This data point can be used to avoid repeated alarm reports. The unit of measure is seconds.</Doc>
<DataType>
<SimpleType type="integer" />
</DataType>
......@@ -1545,13 +1545,13 @@ oneM2M EXPRESSLY ADVISES ANY AND ALL USE OF OR RELIANCE UPON THIS INFORMATION PR
</DataType>
</DataPoint>
<DataPoint name="defaultValue" readable="true" writable="true" eventable="true" optional="true" >
<Doc>The optional default value for the number. The default is 0.0 .</Doc>
<Doc>The optional default value for the number. The default is 0,0.</Doc>
<DataType>
<SimpleType type="float" />
</DataType>
</DataPoint>
<DataPoint name="step" readable="true" writable="true" eventable="true" optional="true" >
<Doc>The optional step size for controlled increment and decrement. The default is 1.0, even when this data point is not implemeneted.</Doc>
<Doc>The optional step size for controlled increment and decrement. The default is 1,0, even when this data point is not implemented.</Doc>
<DataType>
<SimpleType type="float" />
</DataType>
......@@ -1667,7 +1667,7 @@ oneM2M EXPRESSLY ADVISES ANY AND ALL USE OF OR RELIANCE UPON THIS INFORMATION PR
</DataType>
</DataPoint>
<DataPoint name="ozoneStatus" readable="true" writable="false" eventable="true" optional="true" >
<Doc>The ozoneStatus indicates the level of ozone status. (see clause 5.6.21).</Doc>
<Doc>The ozoneStatus indicates the level of ozone status. (See clause 5.6.21).</Doc>
<DataType>
<SimpleType type="hd:enumOzoneStatus" />
</DataType>
......@@ -1683,7 +1683,7 @@ oneM2M EXPRESSLY ADVISES ANY AND ALL USE OF OR RELIANCE UPON THIS INFORMATION PR
<ModuleClass name="phoneCall">
<Doc>This ModuleClass provides the capability get or set the caller and receipient IDs as well as to initate and terminate a call.</Doc>
<Doc>This ModuleClass provides the capability get or set the caller and recipient IDs as well as to initiate and terminate a call.</Doc>
<Actions>
<Action name="call" optional="true">
<Doc>Initiate an outgoing call.</Doc>
......@@ -1697,7 +1697,7 @@ oneM2M EXPRESSLY ADVISES ANY AND ALL USE OF OR RELIANCE UPON THIS INFORMATION PR
</Actions>
<Data>
<DataPoint name="callerID" readable="true" writable="true" eventable="true" optional="false" >
<Doc>This data point represents the initiating caller identification of a call. In case of an outgoing call this would be the local line ID. This data point is optional. When it is empty for an incomming call, then the caller ID is unknown. When it is empty for an outgoing call, then it is exepected that it is set by the PBX or the operator. The format of caller ID is not specified here.</Doc>
<Doc>This data point represents the initiating caller identification of a call. In case of an outgoing call this would be the local line ID. This data point is optional. When it is empty for an incoming call, then the caller ID is unknown. When it is empty for an outgoing call, then it is expected that it is set by the PBX or the operator. The format of caller ID is not specified here.</Doc>
<DataType>
<SimpleType type="string" />
</DataType>
......@@ -1778,7 +1778,7 @@ oneM2M EXPRESSLY ADVISES ANY AND ALL USE OF OR RELIANCE UPON THIS INFORMATION PR
<Doc>This ModuleClass provides the capabilities for monitoring printing list information.</Doc>
<Data>
<DataPoint name="uri" readable="true" writable="false" eventable="true" optional="false" >
<Doc>The URI of the printing file. The URI could be "file://www.example.com/file.extension"</Doc>
<Doc>The URI of the printing file. The URI could be "file://www.example.com/file.extension".</Doc>
<DataType>
<Array>
<DataType>
......@@ -1817,7 +1817,7 @@ oneM2M EXPRESSLY ADVISES ANY AND ALL USE OF OR RELIANCE UPON THIS INFORMATION PR
</DataType>
</DataPoint>
<DataPoint name="energy" readable="true" writable="false" eventable="true" optional="true" >
<Doc>The measurement of energy by pulsemeter. The unit of mease is kilocalorie per hour.</Doc>
<Doc>The measurement of energy by pulsemeter. The unit of measure is kilocalorie per hour.</Doc>
<DataType>
<SimpleType type="float" />
</DataType>
......@@ -2013,7 +2013,7 @@ oneM2M EXPRESSLY ADVISES ANY AND ALL USE OF OR RELIANCE UPON THIS INFORMATION PR
<ModuleClass name="sessionDescription">
<Doc>This ModuleClass provides the capabilities for a sessionDescription containing a URL at twhich the specified media can be accessed and the definition of media using SDP.</Doc>
<Doc>This ModuleClass provides the capabilities for a sessionDescription containing a URL at which the specified media can be accessed and the definition of media using SDP.</Doc>
<Data>
<DataPoint name="url" readable="true" writable="false" eventable="true" optional="true" >
<Doc>A URL at which the specified media can be accessed.</Doc>
......@@ -2022,7 +2022,7 @@ oneM2M EXPRESSLY ADVISES ANY AND ALL USE OF OR RELIANCE UPON THIS INFORMATION PR
</DataType>
</DataPoint>
<DataPoint name="sdp" readable="true" writable="false" eventable="true" optional="true" >
<Doc>Media description using SDP. One or more comma separated multiple SDP lines (SDP media or attribute line) can be included using SDP description syntax as defined in the SDP specification in RFC4566.</Doc>
<Doc>Media description using SDP. One or more comma separated multiple SDP lines (SDP media or attribute line) can be included using SDP description syntax as defined in the SDP specification in IETF RFC4566.</Doc>
<DataType>
<SimpleType type="string" />
</DataType>
......@@ -2065,8 +2065,8 @@ oneM2M EXPRESSLY ADVISES ANY AND ALL USE OF OR RELIANCE UPON THIS INFORMATION PR
<SimpleType type="datetime" />
</DataType>
</DataPoint>
<DataPoint name="smokeThreshhold" readable="true" writable="true" eventable="true" optional="true" >
<Doc>The threshhold to trigger the alarm. The unit of measure is ppm.</Doc>
<DataPoint name="smokeThreshold" readable="true" writable="true" eventable="true" optional="true" >
<Doc>The threshold to trigger the alarm. The unit of measure is ppm.</Doc>
<DataType>
<SimpleType type="integer" />
</DataType>
......@@ -2120,7 +2120,7 @@ oneM2M EXPRESSLY ADVISES ANY AND ALL USE OF OR RELIANCE UPON THIS INFORMATION PR
<ModuleClass name="steamClosetJobMode">
<Doc>This ModuleClasses provides capabilities to control and monitor the job modes of steamCloset.</Doc>
<Doc>This ModuleClass provides capabilities to control and monitor the job modes of steamCloset.</Doc>
<Data>
<DataPoint name="currentJobMode" readable="true" writable="true" eventable="true" optional="false" >
<Doc>Currently active job mode (see clause 5.6.26).</Doc>
......@@ -2166,7 +2166,7 @@ oneM2M EXPRESSLY ADVISES ANY AND ALL USE OF OR RELIANCE UPON THIS INFORMATION PR
</DataType>
</DataPoint>
<DataPoint name="availableChannels" readable="true" writable="false" eventable="true" optional="true">
<Doc>The list of available channel numbers which may be build by automatic scan and/or manual selction.</Doc>
<Doc>The list of available channel numbers which may be built by automatic scan and/or manual selection.</Doc>
<DataType>
<Array>
<DataType>
......@@ -2192,7 +2192,7 @@ oneM2M EXPRESSLY ADVISES ANY AND ALL USE OF OR RELIANCE UPON THIS INFORMATION PR
<ModuleClass name="temperature">
<Doc>This ModuleClass provides capabilities to represent the current temperature and target temperature of devices such as an air conditioner, refrigerator, oven and etc.</Doc>
<Doc>This ModuleClass provides capabilities to represent the current temperature and target temperature of devices such as an air conditioner, refrigerator, oven, etc.</Doc>
<Data>
<DataPoint name="currentTemperature" readable="true" writable="false" eventable="true" optional="false">
<Doc>The current temperature.</Doc>
......@@ -2207,7 +2207,7 @@ oneM2M EXPRESSLY ADVISES ANY AND ALL USE OF OR RELIANCE UPON THIS INFORMATION PR
</DataType>
</DataPoint>
<DataPoint name="unit" readable="true" writable="false" eventable="true" optional="true">
<Doc>The unit of measure for the temperature values. The default is celsius (C).</Doc>
<Doc>The unit of measure for the temperature values. The default is Celsius (C).</Doc>
<DataType>
<SimpleType type="string" />
</DataType>
......@@ -2244,13 +2244,13 @@ oneM2M EXPRESSLY ADVISES ANY AND ALL USE OF OR RELIANCE UPON THIS INFORMATION PR
</DataType>
</DataPoint>
<DataPoint name="temperature" readable="true" writable="false" eventable="true" optional="true">
<Doc>To report the value of the temperature. The unit of measure is celsius (C).</Doc>
<Doc>To report the value of the temperature. The unit of measure is Celsius (C).</Doc>
<DataType>
<SimpleType type="float" />
</DataType>
</DataPoint>
<DataPoint name="temperatureThreshhold" readable="true" writable="true" eventable="true" optional="true">
<Doc>The threshhold to trigger the alarm.</Doc>
<DataPoint name="temperatureThreshold" readable="true" writable="true" eventable="true" optional="true">
<Doc>The threshold to trigger the alarm.</Doc>
<DataType>
<SimpleType type="integer" />
</DataType>
......@@ -2274,7 +2274,7 @@ oneM2M EXPRESSLY ADVISES ANY AND ALL USE OF OR RELIANCE UPON THIS INFORMATION PR
</DataType>
</DataPoint>
<DataPoint name="supportedMessageValues" readable="true" writable="false" eventable="true" optional="true" >
<Doc>List of supported values for the message. Each of the values in this list must be URL-encoded. An encoded value must not contain white spaces.</Doc>
<Doc>List of supported values for the message. Each of the values in this list shall be URL-encoded. An encoded value shall not contain white spaces.</Doc>
<DataType>
<Array>
<DataType>
......@@ -2312,7 +2312,7 @@ oneM2M EXPRESSLY ADVISES ANY AND ALL USE OF OR RELIANCE UPON THIS INFORMATION PR
<ModuleClass name="timer">
<Doc>This ModuleClass provides capabilities to monitor and control the times when the appliance executes its operations, that means when it starts, when it ends etc.</Doc>
<Doc>This ModuleClass provides capabilities to monitor and control the times when the appliance executes its operations, that means when it starts, when it ends, etc.</Doc>
<Actions>
<Action name="activateClockTimer" optional="true">
<Doc>Activate current clock timer.</Doc>
......@@ -2375,10 +2375,10 @@ oneM2M EXPRESSLY ADVISES ANY AND ALL USE OF OR RELIANCE UPON THIS INFORMATION PR
<ModuleClass name="turbo">
<Doc>This ModuleClass provides capabilities to enable turbo mode and monitor the current status of the turbo function. It is intended to be part of devices which use turbo function such as an air conditioner, a washing machine etc.</Doc>
<Doc>This ModuleClass provides capabilities to enable turbo mode and monitor the current status of the turbo function. It is intended to be part of devices which use turbo function such as an air conditioner, a washing machine, etc.</Doc>
<Data>
<DataPoint name="turboEnabled" readable="true" writable="true" eventable="true" optional="false">
<Doc>The current status of the turbo mode. "True" indicates enabaled, and "False" indicates not enabled.</Doc>
<Doc>The current status of the turbo mode. "True" indicates enbaled, and "False" indicates not enabled.</Doc>
<DataType>
<SimpleType type="boolean" />
</DataType>
......
......@@ -258,7 +258,7 @@ signalStrength,sigSh
lqi,lqi
rssi,rssi
smokeSensor,smoSr
smokeThreshhold,smoTd
smokeThreshold,smoTd
currentValue,crv
sphygmomanometer,sphyr
diastolicPressure,diaPe
......@@ -277,7 +277,7 @@ currentTemperature,curT0
targetTemperature,tarTe
unit,unit
temperatureAlarm,temAm
temperatureThreshhold,temTd
temperatureThreshold,temTd
textMessage,texMe
supportedMessageValues,suMVs
minLength,minLh
......@@ -301,13 +301,10 @@ waterFlow,watFw
waterFlowStrength,waFSh
waterSensor,watSr
weight,weigt
upChannel,uphCl
nextTrack,nexTk
resetNumberValue,reNVe
answer,answr
downChannel,dowCl
start3Dprint,staDt
previousTrack,preTk
downChannel,dowCl
close,close
upVolume,upoVe
decrementNumberValue,deNVe
......@@ -319,8 +316,11 @@ call,call
downVolume,dowVe
incrementNumberValue,inNVe
toggle,togge
upChannel,uphCl
deactivateClockTimer,deCTr
open,open
nextTrack,nexTk
resetNumberValue,reNVe
commonTypes,comTs
deviceThreeDPrinter,dTDPr
binarySwitchAnnc,binShAnnc
......
......@@ -48,7 +48,7 @@ oneM2M EXPRESSLY ADVISES ANY AND ALL USE OF OR RELIANCE UPON THIS INFORMATION PR
<xs:element name="alarm" type="xs:boolean" />
<xs:element name="detectedTime" minOccurs="0" type="m2m:timestamp" />
<xs:element name="smokeThreshhold" minOccurs="0" type="xs:integer" />
<xs:element name="smokeThreshold" minOccurs="0" type="xs:integer" />
<xs:element name="currentValue" minOccurs="0" type="xs:integer" />
......@@ -78,7 +78,7 @@ oneM2M EXPRESSLY ADVISES ANY AND ALL USE OF OR RELIANCE UPON THIS INFORMATION PR
<xs:element name="alarm" minOccurs="0" type="xs:boolean" />
<xs:element name="detectedTime" minOccurs="0" type="m2m:timestamp" />
<xs:element name="smokeThreshhold" minOccurs="0" type="xs:integer" />
<xs:element name="smokeThreshold" minOccurs="0" type="xs:integer" />
<xs:element name="currentValue" minOccurs="0" type="xs:integer" />
......
......@@ -48,7 +48,7 @@ oneM2M EXPRESSLY ADVISES ANY AND ALL USE OF OR RELIANCE UPON THIS INFORMATION PR
<xs:element name="alarm" type="xs:boolean" />
<xs:element name="temperature" minOccurs="0" type="xs:float" />
<xs:element name="temperatureThreshhold" minOccurs="0" type="xs:integer" />
<xs:element name="temperatureThreshold" minOccurs="0" type="xs:integer" />
<!-- Child Resources -->
......@@ -77,7 +77,7 @@ oneM2M EXPRESSLY ADVISES ANY AND ALL USE OF OR RELIANCE UPON THIS INFORMATION PR
<xs:element name="alarm" minOccurs="0" type="xs:boolean" />
<xs:element name="temperature" minOccurs="0" type="xs:float" />
<xs:element name="temperatureThreshhold" minOccurs="0" type="xs:integer" />
<xs:element name="temperatureThreshold" minOccurs="0" type="xs:integer" />
<!-- Child Resources -->
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment